Musty odors that will not go away
We locate the source with thermal imaging and boroscope cameras, remove the mold, and treat the area with fogging and HEPA filtration. The odor disappears once the mold is gone.
As a licensed Mold Remediation Company in VENTURA, California, we handle mold removal for homes and businesses from Downtown Ventura to Saticoy. If you have musty odors, visible black mold growth, or recent water damage, we inspect, contain, and remove the problem. We serve Ventura County with same-day response and upfront pricing.

A Mold Remediation Company in VENTURA, California is a licensed contractor that finds mold, stops the moisture feeding it, and removes contaminated materials safely. We start with a boroscope inspection camera and moisture meter to trace hidden growth inside walls, under floors, and above ceilings. Then we set up containment with plastic sheeting and zipper doors, run air scrubbers with HEPA filters, and remove mold from drywall, framing, and HVAC components. Finally we apply antimicrobial spray and an encapsulant coating to prevent regrowth.
Ventura properties face mold pressure from coastal fog, winter rain, and plumbing leaks in older buildings. We see crawl space mold, attic mold, and bathroom mold across Midtown Ventura and the Ventura Keys. If you search for a mold removal company near me VENTURA, you want a team that understands local humidity swings and can respond before spores spread. We document every job with photos and moisture readings so you know the work is complete.
Every mold remediation job includes inspection, containment, removal, cleaning, and verification. We also provide documentation for insurance and real estate. Add-on services like duct cleaning or drywall replacement are available if needed.
We inspect the affected area with moisture meters, thermal imaging cameras, and boroscope inspection cameras. We identify the mold species through lab testing and document the extent of growth. You receive a written report with photos and moisture readings.
We seal off the work area with plastic sheeting and zipper doors. Negative air machines and air scrubbers with HEPA filters run continuously to capture spores. This protects your family and belongings from cross-contamination during removal.
We remove mold from drywall, insulation, wood, and other materials using HEPA vacuums, dry ice blasting, and hand tools. Contaminated materials are bagged and disposed of according to California regulations. We treat remaining surfaces with antimicrobial spray and encapsulant coating.
After removal, we HEPA vacuum all surfaces and wipe with disinfectant wipes. We use a fogging machine with Benefect or Concrobium to treat hidden areas. Dehumidifiers run until moisture levels are back to normal.
We collect air samples with an air sampling pump and send them to a third-party lab. Results confirm whether mold spore levels are normal. You receive a clearance report for your records, insurance, or real estate transaction.
We arrive within your scheduled window and inspect the affected area with a moisture meter, thermal imaging camera, and boroscope inspection camera. We take air samples with an air sampling pump and send them to a lab. You get a written scope and price the same day, usually within two hours on-site.
Our crew seals off the work area with plastic sheeting and zipper doors. We install a negative air machine and air scrubbers with HEPA filters to capture airborne spores. This step takes one to three hours depending on the size of the contaminated zone.
We remove mold from drywall, insulation, and framing using HEPA vacuums, dry ice blasting machine for tough surfaces, and hand tools. Porous materials that cannot be cleaned go into sealed bags. We apply antimicrobial spray and encapsulant coating to remaining structural surfaces. This phase runs one to three days for most residential jobs.
After removal, we HEPA vacuum all surfaces and wipe with disinfectant wipes. We run a fogging machine with Benefect or Concrobium to treat hidden areas. A dehumidifier and air scrubber run until moisture readings drop below 15% in wood and 50% relative humidity in the air.
We take clearance air samples with an air sampling pump and send them to a third-party lab. Results come back in 24 to 48 hours. If levels are clear, we remove containment and provide a written report. If not, we re-clean at no extra charge.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Detects moisture levels in drywall, wood, and concrete to find hidden water sources feeding mold.
Reveals temperature differences behind walls to locate hidden moisture and mold growth.
Allows us to see inside wall cavities and ductwork without major demolition.
Filters airborne mold spores with HEPA filters to maintain clean air during remediation.
Creates negative pressure in containment to prevent spores from escaping to clean areas.
Removes mold from wood and concrete surfaces without chemicals or water.
Applies Benefect or Concrobium fog to hard-to-reach areas to kill mold spores.
A homeowner in Pierpont Bay noticed musty odors and called us. We found mold covering 40% of the crawl space joists and subfloor. Moisture readings were above 25% in wood. The crawl space had no vapor barrier and poor ventilation.
We removed the mold with HEPA vacuums and dry ice blasting, installed a vapor barrier, and added ventilation. Moisture readings dropped below 15%. Post-remediation air testing showed normal spore levels. The homeowner reported the musty odor was gone.
A Midtown homeowner discovered black mold on attic roof sheathing after a winter leak. The mold covered about 100 square feet. The attic had inadequate ventilation, and moisture levels were high.
We contained the attic, removed moldy sheathing and insulation, and treated the framing with antimicrobial spray and encapsulant coating. We also installed additional vents. Clearance testing confirmed normal spore levels. The roof leak was repaired by a roofer.
A Ventura Keys homeowner had recurring mold on bathroom walls and ceiling. The bathroom had no exhaust fan, and humidity stayed above 70% after showers. Mold covered about 30 square feet of drywall.
We removed moldy drywall, treated the framing, and installed mold-resistant drywall. We also installed a new exhaust fan. Post-remediation testing showed normal spore levels. The homeowner painted the bathroom with mold-resistant paint.
From crawl space mold to HVAC contamination, we handle the mold issues that Ventura homeowners and business owners face. Here are the most common problems we solve.
Ask a pro →We locate the source with thermal imaging and boroscope cameras, remove the mold, and treat the area with fogging and HEPA filtration. The odor disappears once the mold is gone.
We contain the area, remove moldy drywall and insulation, and treat framing with antimicrobial spray and encapsulant coating. Post-remediation testing confirms the mold is gone.
We remove mold from crawl space surfaces, install vapor barriers, and improve ventilation. Dehumidifiers keep moisture levels low to prevent regrowth.
We inspect ductwork with boroscope cameras, remove mold from HVAC components, and clean ducts with HEPA vacuums. We also install UV lights or other treatments to prevent future growth.
Most mold remediation jobs in Ventura cost between $1,200 and $6,500 in 2026. Small areas under 10 square feet often run $1,200 to $2,500. Crawl space mold removal or attic mold testing and removal for a typical home ranges from $2,500 to $6,500. Larger commercial jobs or HVAC mold contamination can exceed $10,000. We provide a written estimate after inspection so you know the exact price before we start.
Look for a company with a California Contractors State License Board license, liability insurance, and IICRC AMRT certification. Ask if they perform post remediation mold testing with a third-party lab. A reputable mold cleanup company in VENTURA California will give you a written scope and price before work begins and will not ask for full payment upfront. We meet all these standards and provide documentation on every job.
The best company for your job is one that is licensed, insured, and has verifiable local experience. We have been in business since 2022 and have completed hundreds of mold jobs in Ventura County. Our technicians hold IICRC and ACAC certifications. We offer same-day response, upfront pricing, and third-party clearance testing. Check our mold remediation company VENTURA California reviews on Google and Yelp to see what customers say.
Yes, we offer financing options for mold remediation projects over $2,500. You can apply online or by phone and get a decision within minutes. We work with lenders who specialize in home improvement and restoration projects. If you need affordable mold cleanup company VENTURA services, ask about our payment plans when you call for your estimate.
Mold spreads fast. We answer calls 24/7 and can be on-site within hours for emergencies. Our licensed technicians provide upfront pricing and verified results. Call now for a free estimate.
Get Free Estimate (833) 929-5837 →Call us at (833) 929-5837 any time, day or night. Our phone line is answered by a real person, and we can usually schedule an inspection within 24 hours. For emergencies like burst pipes or post-flood mold, we can be on-site in Ventura within a few hours. You can also email us at info@moldremediationserviceventura.com.