Same-day mold removal, IICRC-certified techs, upfront pricing

Mold Remediation Near Me in VENTURA, California

When you search for Mold Remediation Near Me in VENTURA, California, you want a crew that shows up today, not next week. We handle black mold growth, musty odors, and water damage mold in homes and businesses from Downtown Ventura to Saticoy. Our IICRC AMRT-certified technicians use moisture meters, thermal imaging cameras, and HEPA air scrubbers to find the source, contain it, and clear it. Call (833) 929-5837 for a same-day inspection.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service Ventura serving VENTURA, California
Careful work. Honest options.
About this service

Mold Remediation Near Me in VENTURA, California

Mold Remediation Near Me in VENTURA, California is the process of locating active mold growth, containing it, physically removing contaminated materials, and drying the structure so spores cannot rebound. It is not a bleach wipe-down. We use moisture meters and thermal imaging cameras to trace hidden water, a boroscope inspection camera to check inside walls, and HEPA vacuums paired with negative air machines to capture spores instead of spreading them. Every job follows IICRC S520 standards, and we verify clearance with air sampling pumps before we call it done.

Ventura homes sit close to the coast, so marine humidity, morning fog, and winter rain keep wall cavities damp long after the storm passes. That is why crawl space mold, attic mold, and bathroom mold calls spike here every year. If you have been typing mold removal near me VENTURA into your phone at 10 p.m. because the hallway smells like wet cardboard, you are not alone. We answer 24/7, and we can often be at your door the same day.

  • ✓ Same-Day Response
  • ✓ Verified Clearance
  • ✓ Containment That Holds
  • ✓ Insurance-Ready Documentation
What's included

What Mold Remediation Near Me Includes

Every remediation job includes the core steps: inspection, containment, removal, drying, and clearance testing. Add-ons like duct cleaning or vapor barrier installation are quoted separately if you need them. Here is what you get as standard.

✓

Full Moisture Inspection

We check every room, the attic, and the crawl space with moisture meters and thermal imaging cameras. We also use a boroscope inspection camera inside wall cavities. You get a written report with photos and moisture readings before we start.

✓

Containment and Air Filtration

We build 6-mil plastic sheeting barriers with zipper doors and run negative air machines and HEPA air scrubbers. This keeps spores out of clean areas. Technicians wear Tyvek suits and respirators throughout the job.

✓

Physical Removal and Treatment

We cut out contaminated drywall, insulation, and trim, then HEPA vacuum every surface. We apply antimicrobial spray like Benefect or Concrobium, and use a fogging machine for voids. Heavy growth on framing gets dry ice blasting machine treatment.

✓

Structural Drying

We set Dri-Eaz dehumidifiers and Phoenix Restoration Equipment air movers to pull moisture out of framing and subfloor. Target moisture content is under 15 percent on wood. Drying usually runs 2 to 4 days depending on how wet the structure is.

✓

Clearance Testing

After drying, we run post-remediation mold testing with air sampling pumps and send samples to an accredited lab. If spore counts match the outdoor baseline, we hand you the clearance report. If not, we re-clean at no extra charge.

How it works

What Our Mold Remediation Process Looks Like

01

Inspection and Testing

A certified technician walks the property with a moisture meter and thermal imaging camera, checking walls, ceilings, and subfloor. We take air samples with an air sampling pump and surface swabs. You get a written report with spore counts and photos, usually within 24 hours. This step takes 45 to 90 minutes on a typical Ventura home.

02

Containment Setup

We seal the work area with 6-mil plastic sheeting and zipper doors, then position negative air machines and HEPA air scrubbers to pull air out and filter it. This keeps spores from drifting into your kitchen or bedrooms. Setup runs 1 to 2 hours depending on how many rooms are affected.

03

Physical Removal

Contaminated drywall, insulation, and trim get cut out and bagged. We HEPA vacuum every exposed surface, then apply an antimicrobial spray like Benefect or Concrobium. For heavy growth on framing, we use dry ice blasting machine equipment to strip mold without damaging the wood. Removal typically takes 1 to 3 days.

04

Drying and Treatment

We set Dri-Eaz dehumidifiers and Phoenix Restoration Equipment air movers to pull moisture out of the structure. Target moisture content is under 15 percent on wood framing. We finish with a fogging machine treatment using Sporicidin or Microban to reach voids a rag cannot. Drying usually runs 2 to 4 days.

05

Clearance Testing

Once drying is complete, we run post-remediation mold testing with air sampling pumps and send samples to an accredited lab. If spore counts match the outdoor baseline, we hand you the clearance report. If they do not, we re-clean at no extra charge. Lab results come back in 24 to 48 hours.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter and Thermal Imaging Camera

We use these to find hidden moisture behind walls, under floors, and in ceilings without tearing anything out. Thermal imaging shows temperature differences that indicate wet materials.

Boroscope Inspection Camera

A boroscope lets us look inside wall cavities and ductwork through a small hole. We confirm mold growth and moisture before we open up a wall, which saves time and money.

HEPA Vacuum and Air Scrubber

HEPA vacuums capture spores instead of spreading them. Air scrubbers run continuously during the job to filter the air in the work zone. We use Abatement Technologies units on most jobs.

Negative Air Machine

Negative air machines pull air out of the containment zone and exhaust it through a HEPA filter. This keeps spores from drifting into clean rooms. We size the machine to the cubic footage of the space.

Fogging Machine

A fogging machine applies Sporicidin or Microban into wall cavities and voids a rag cannot reach. It is a finishing step after physical removal, not a replacement for it.

Dry Ice Blasting Machine

Dry ice blasting strips mold off framing without damaging the wood or leaving media behind. We use it on heavy growth in attics and crawl spaces where sanding would be too slow.

Air Sampling Pump

Air sampling pumps pull a measured volume of air through a collection cassette. We send the cassette to an accredited lab and compare indoor spore counts against an outdoor baseline.

Real results

Before and after.

Crawl Space Mold in Midtown

Before

A 1950s Midtown home had a crawl space full of black mold growth on floor joists and subfloor. Insulation was soaked from a slow plumbing leak. The musty smell had been rising into the living room for months.

After

We removed 320 square feet of contaminated insulation, treated joists with antimicrobial spray, and installed a vapor barrier. Moisture content dropped from 28 percent to 11 percent. Lab clearance came back clean in 48 hours.

Bathroom Mold Behind Vanity

Before

A Pierpont Bay homeowner found black mold behind the bathroom vanity after a slow leak from the sink trap. Drywall was soft and the cabinet base was stained. The smell was noticeable from the hallway.

After

We cut out 12 square feet of contaminated drywall, treated the framing, and replaced the cabinet base. Drying took 2 days with a Dri-Eaz dehumidifier. Post-remediation mold testing cleared with spore counts matching the outdoor baseline.

Attic Mold After Roof Leak

Before

A Foothill home had attic mold across 200 square feet of roof sheathing after a flashing leak. Insulation was wet and compressed. The homeowner noticed a musty smell in the upstairs bedroom.

After

We removed contaminated insulation, treated sheathing with dry ice blasting machine equipment, and applied an encapsulant coating. Drying took 3 days. Clearance testing confirmed spore counts below the outdoor baseline.

Problems we solve

Mold Problems We Solve in Ventura

These are the calls we get most often from Ventura homeowners and property managers. If any of these sound familiar, call (833) 929-5837 and we will schedule a same-day inspection.

Ask a pro →
01

Musty odor with no visible mold

We use thermal imaging cameras and a boroscope inspection camera to find the source without tearing out walls. Once located, we contain the area, remove the growth, and dry the cavity. Most hidden-mold jobs finish in 2 to 4 days.

↗
02

Crawl space mold after winter rain

We remove contaminated insulation, treat joists with antimicrobial spray, and install a vapor barrier. We also set Dri-Eaz dehumidifiers to bring moisture content under 15 percent. Most crawl space jobs take 2 to 3 days.

↗
03

Bathroom mold that keeps coming back

We find the leak with a moisture meter, remove affected drywall and caulk, treat the framing, and check behind the shower valve. We also recommend ventilation fixes. Most bathroom jobs finish in 1 day.

↗
04

Attic mold from roof leaks or condensation

We inspect sheathing, rafters, and insulation, then remove contaminated materials and treat the framing. If the roof is leaking, we document it for your roofer. Most attic jobs take 1 to 2 days plus drying.

↗
Proof you can check

Licensed, Certified, and Reviewed

✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
OSHA 10Occupational Safety and Health Administration
✓
California Contractors State License Board (CSLB) LicenseCalifornia Contractors State License Board
Good questions

Frequently Asked Questions

(833) 929-5837 →

Most residential jobs in Ventura run $1,200 to $6,500 in 2026, with small bathroom or attic jobs starting around $800 and whole-house crawl space work reaching $10,000 or more. Price depends on square footage, how deep the mold goes, and whether we are cutting out drywall. We give you a written scope and price before we start, and we do not add line items without your approval.

We do. Call (833) 929-5837 and we dispatch a certified technician, often within 2 to 4 hours. Same-day mold removal near me VENTURA requests get priority when there is active water intrusion or a strong musty odor. We answer the phone 24/7, including weekends and holidays, because mold does not wait for business hours.

Most jobs start within 24 hours of your call, and emergency calls get a crew on site the same day. The full remediation typically takes 3 to 7 days from containment to clearance testing, depending on how much material we remove and how long drying takes. We give you a day-by-day schedule during the inspection so you know what to expect.

Yes. We hold a California Contractors State License Board (CSLB) license and carry full liability and workers comp insurance. Our technicians are IICRC AMRT and WRT certified, and we follow California Department of Public Health guidelines on mold assessment and cleanup. You can request proof of license and insurance before we start work.

Ready when you are

Get Mold Remediation Near Me in VENTURA, California

If you can smell musty odors or see black mold growth, call us now. We answer 24/7, dispatch same-day crews across Ventura County, and give you a written price before we start. Licensed, insured, and IICRC AMRT certified. Call (833) 929-5837.

Call Now (833) 929-5837 →
Request an appointment

Contact Mold Remediation Service Ventura

Call us at (833) 929-5837 any time, day or night. Our phone line is answered by a real person, and we can usually schedule an inspection within 24 hours. For emergencies like burst pipes or post-flood mold, we can be on-site in Ventura within a few hours. You can also email us at info@moldremediationserviceventura.com.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837